A large-scale sliding door system with slim profiles completely hidden in the floor, walls and ceiling.
Moreview makes it possible to construct doors with a maximum height of up to 4 m and a maximum sliding leaf weight of up to 1200 kg.
The aesthetics of the design are supported by, among other things, a visible mullion width of only 27 mm at the leaf exit. The innovative design allows glass panes to be installed side by side without any aluminium components visible from the outside. The static mullion makes it possible to create a sequence of fixed glazings, while the all-glass corner allows them to be joined at any angle.
ASYMMETRICAL CORNERS
New solution of the Moreview system allows for systemic connection of various window frames at an angle of 90° along with maintaining the level of glazing perfectly with the floor line.
Thanks to glazing resulting from the use of fixed windows, we can make the most of natural light and warmth. This will have a positive effect not only on our comfort of living, but will also reduce the costs of using the house.
FIXED GLAZING IN MOREVIEW STYLE
The Moreview system has been enriched with a new solution which makes it possible to design fixed gazing. Single frame, which was used up till now, has been modernized by adding a detachable fin facilitating the installation of a glazed units. This procedure allows us to manufacture single-sash fixed windows and corners composed of two fixed elements.
The solution is compatible with standard frames without separated fins, which is especially important in structures broken multiple times at various angles.
AUTOMATION OF THE MOREVIEW CONTROL PROCESS
Within the MV system, two solutions are available for automating the sash sliding process:
OTHER SOLUTIONS IN THE MOREVIEW SYSTEM
Advantages of the system
Thermal insulation EN 10077-2 – Uw from 0,7 W/m²K
Acoustic insulation EN ISO 140-3 – Rw = 42 dB
Air permeability EN 12207 – Class 4
Water tightness EN 12208 – Class 8A
Wind load resistance EN 12210 – Class C4
Anti-theft protection EN 1627 – RC2
Frame structural depth – 90 mm, 192 mm, 294 mm
Leaf structural depth – 72 mm
Infill thickness – 31 ÷ 36 mm and 50 ÷ 60 mm
Maximum dimensions L x H – leaf 4000 x 4000 mm
Maximum weight of manual leaf – 400 kg
Maximum weight of automatic leaf – 1200 kg
Maximum weight of fixed part – 1200 kg
Structure type / leaves diagram – Diagrams: A, C, D, F, G, K, Galendage, 90° corners
A large-scale sliding door system with slim profiles completely hidden in the floor, walls and ceiling.
Moreview makes it possible to construct doors with a maximum height of up to 4 m and a maximum sliding leaf weight of up to 1200 kg.
The aesthetics of the design are supported by, among other things, a visible mullion width of only 27 mm at the leaf exit. The innovative design allows glass panes to be installed side by side without any aluminium components visible from the outside. The static mullion makes it possible to create a sequence of fixed glazings, while the all-glass corner allows them to be joined at any angle.
MOREVIEW CLASS S is an ultra-modern solution that allows for almost complete elimination of the boundary between the inside and the outside. All structure elements are hidden under the floor. The user only sees narrow “gaps” This solution enables virtually unlimited possibilities of arranging the floor at the contact point of the house interior and the external surroundings, e.g. terrace.
Advantages of the system
DP 180 is a system for making lift-and-slide windows and doors for external structures.
The DP 180 system is a modern solution based on aluminium profiles with thermal spacers. The construction of the DP 180 system influences the reduction of thermal energy losses, thus reducing the operating costs of the designed buildings.
The product is intended for use in both residential and public buildings.
Advantages of the system
possibility of making the structure with a narrow mullion in RC2 class,
possibility of manufacturing doors of very large dimensions,
possibility of manufacturing all-glass corner at an angle of 90˚and a movable mullion,
possibility of manufacturing doors with integrated threshold – no architectural barriers,
divided thermal separators increasing resistance to thermal deformation of the leaf,
possibility of installing automatic doors opening/closing system,
micro ventilation in the standard variant,
possibility of infill assembly from the outside,
possibility of joining of glass panes without sash bars,
linear drainage solution,
possibility of using pleated mosquito nets in the monorail frame.
STANDART
Thermal insulation EN 10077-2 -Uw od 0,7 W/m2K
Acoustic insulation EN ISO 140-3 – RW = 47 dB
Air permeability EN 12207 – Class 3
Water tightness EN 12208 – Class 8A
Wind load resistance EN 12210 – Class C2
Burglar resistance EN 1627 – RC2
Frame construction depth -180 mm with extension capability
Leaf construction depth – 81 mm
Filling thickness – 29 ÷ 63 mm
Maximum dimensions L x H – Leaf: 3300 x 3300 mm
Maximum weight of manual leaf – 440 kg
Maximum weight of automatic leaf – 600 kg 600 kg
Maximum weight of fixed part – 1200 kg
Type of construction / leaf schemes – Diagrams: A, C, D, F, G, K, corner 90°
SLIM
Thermal insulation Uw od 0,7 W/m2K
Acoustic insulation EN ISO 140-3 –
Air permeability EN 12207 – Class 4
Water tightness EN 12208 – Class 9A
Wind load resistance EN 12210 – Class C4
Burglar resistance EN 1627 –
Frame construction depth -180 mm with extension capability
Leaf construction depth – 81 mm
Filling thickness – 29 ÷ 63 mm
Maximum dimensions L x H – Leaf: 3300 x 3300 mm
Maximum weight of manual leaf – 440 kg
Maximum weight of automatic leaf – 600 kg
Maximum weight of fixed part – 1200 kg
Type of construction / leaf schemes – Diagrams: A, C, D, G, K
An extremely impressive solution for eliminating visible aluminium elements from the outside of the structure.
The GLASS version also allows the sliding door frames to be completely hidden in the floor, ceiling and insulation layer.
Advantages of the system
Thermal insulation EN 10077-2 – Uw from 0,7 W/m2K
Air permeability EN 12207 – Class 4
Water tightness EN 12208 – E1650
Wind load resistance EN 12210 – C4
Anti-theft protection EN 1627 RC2
Frame construction depth -180 mm with extension capability
Leaf construction depth – 81 mm
Filling thickness – 27 ÷ 71 mm
Maximum dimensions L x H – Leaf: 3210 x 3300 mm
Maximum weight of manual leaf – 440 kg
Maximum weight of automatic leaf – 600 kg
Maximum weight of fixed part – 1200 kg
Type of construction / leaf schemes – Diagrams: A, C, G
TM 77 BIFOLD external folding doors combine high thermal insulation and comfort with maximum light transmission when the leaves are folded to the sides
They are characterised by the versatility of configuration solutions with multi-leaf arrangements opening either to the inside or to the outside of the building. They can have any configuration of leaves.
It is a very convenient solution for everyday use, and at the same time has high technical parameters and allows large-scale structures to be made.
It is a modern product that fits in well with architects’ design freedom and has been developed to meet the high demands of users and investors.
In addition to the standard folding elements, TM 77 BIFOLD can have a main door section where the first leaf is used as an entrance door without affecting the other folding elements.
Additional compensation profiles offer the possibility of adjusting and reducing the tension independently of external conditions.
The folding system is compatible with the TM 77HI window and door system, and the method of connecting profiles is similar to other systems in the Yawal offer.
Advantages of the system
STANDART
Thermal insulation EN 10077-2 -Uw from 0,95 W/m2K
Air permeability EN 12207 – Class 4
Water tightness EN 12208 – Class 9A
Wind load resistance EN 12210 – Class C4
Frame construction depth – 77mm
Leaf construction depth – 77 mm
Filling thickness – 21 ÷ 61 mm
Maximum dimensions L x H – Leaf: 1200 x 3500 mm (minimum width 600 mm)
Maximum weight of manual leaf – 120 kg
Structure type / leaves diagrams – 220, 220+, 330, 321, 321+, 440, 431, 422, 550, 550+, 541, 660, 651, 651+
A modern system of thermally insulated sliding and lift-and-slide doors.
The system has 2 installation depth variants: DP 86 and DP 110.
Excellent thermal insulation has been achieved through the use of thermal spacers exactly in the plane of the glazing and through the division of the construction zones into: warm (thermally insulated) and cold (uninsulated). This is the only solution of its kind available on the market.
Advantages of the system
simple and quick frame prefabrication thanks to cutting the door frame profiles at 90°,
possibility of quick assembly and disassembly of the leaf thanks to the leaf profiles cut at 45 and connected with screwed connectors,
easy glazing allowing simple replacement of glass in the event of breakage,
patented solution of the drainage element that simplifies the drainage system of the structure and at the same time increases its efficiency,
the only system of this class available on the market which enables
manufacture of overhead sliding structures,
the solution of the so called “narrow mullion” in DP 100 and DP 86 versions,
50 mm extension to facilitate the installation of the roller shutter box,
possibility of combining the DP Slide structure with side transom windows,
minimalistic appearance of the vertical profiles of the door frame,
DP 86
Thermal insulation EN 10077-2 – Uw from 1,5 W/m²K
Air permeability EN 12207 – Class 4
Water tightness EN 12208 Class 9A
Wind load resistance EN 12210 – Class C4
Frame structural depth – 86 mm, 131 mm
Sash structural depth – 35,8 mm
Infill thickness – 15 ÷ 24 mm
Maximum dimensions L x H – 1500 x 2400 mm
Maximum weight of manual leaf – 120 kg
Structure type / leaves diagram – Diagrams: A, C, D, K, F
DP 110
Thermal insulation EN 10077-2 – Uw from 1,3 W/m²K
Air permeability EN 12207 – Class 4
Water tightness EN 12208 Class 9A
Wind load resistance EN 12210 – Class C4
Frame structural depth – 108 mm, 167 mm
Sash structural depth – 45mm
Infill thickness – 24 ÷ 33 mm
Maximum dimensions L x H – 1800 x 2800 mm
Maximum weight of manual leaf – 200 kg
Structure type / leaves diagram – Diagrams: A, C, D, K, F
Aluminium profile system for designing and manufacturing glazed sliding segments for enclosing balconies and loggias (L 50B) and sliding segments for partition walls (L 50S)
The glazed partition walls are non-combustible and are classified as non fire-spreading structures (NFS). The L 50 system consists of single-chamber aluminium profiles without a thermal break.
The leaves move on specially adapted bogies. Due to the frame used, it is possible to prefabricate the construction on a double or triple rail.
Advantages of the system
increased safety and comfort of residents,
reduction of noise coming to the rooms from the outside,
protection against weather conditions,
possibility of using various types of infill,
possibility of constructing multiple door frames,
possibility of designing and manufacturing glazed sliding segments for balconies and loggias (L 50B) and sliding segments for partition walls (L 50S),
STANDART
Thermal insulation EN 10077-2 – system without thermal insulation
Acoustic insulation EN ISO 140-3 – Rw = 22 dB
Wind load resistance EN 12210 – NRO
Structural depth of a double-track frame – 50 mm
Structural depth of a triple-track frame – 89,5 mm
Leaf structural depth – 30 mm
Infill thickness – 4 ÷ 16 mm
Maximum dimensions L x H – window 1300 x 1650 mm, door 1300 x 2800 mm
Maximum weight of manual leaf – 130 kg
Structure type / leaves diagram – Diagrams: D, F
Unit 112,
7 Corsican Square,
London, England,
E3 3YD
Mon-Fri :
8.00 AM to 5.00 PM
—
Sat & Sun:
Closed